Toilet purchase big reveal! From novice to expert, one article solves your bathroom choice problem

Classification by flushing method

1. Straight flush toilet: Straight flush toilet is the most traditional toilet, with simple structure, not easy to clog and other advantages, but large momentum, loud noise, water consumption is relatively large.

2. Siphon toilet: Siphon toilet is a more common type of toilet, its noise is small, beautiful, due to strong adsorption capacity, it is easy to flush away the dirty surface of the toilet, but the structure is complex, the volume is relatively large, and the wastewater is easy to block.

according to the drainage form classification

1. Floor toilet: Floor toilet is a more common type of toilet, and its drain is on the ground, which is suitable for most families and places.

2. Wall row toilet: the drain of the wall row toilet is on the wall, which is suitable for some special places and decoration styles, but its price is higher.

Classification by structure

1. Integrated toilet: The connected toilet is usually the water tank and the toilet directly connected together, beautiful appearance, strong sense of integrity, suitable for small toilets.

2. Split toilet: split toilet tank and toilet are separate, in the production process, the base and water tank are connected with screws and sealing rings, occupying a lot of space, and even the joints are easy to accumulate dirt.

02.The dimensions match the space

When buying a toilet, in addition to the shape of the product itself, it is also important to pay attention to the wall distance of the toilet, that is, the distance between the toilet and the wall, which is a factor that needs to be carefully considered in the design and decoration of the toilet. This distance not only affects the installation and use comfort of the toilet, but also is closely related to the overall layout and aesthetics of the toilet. At the same time, the distance between the center of the water outlet and the back wall is also very important, and the standard distance is generally divided into 305mm and 400mm.

03.Sewage effect

For the test of the sewage effect of a toilet, we can divide into three aspects: scouring performance, hanging pollution performance and water seal depth.

Scour property

Whether the toilet can be completely cleaned is its most basic function. In the laboratory, we simulated 100 solid balls into the toilet and conducted a sewage test, and the results showed that all the solid balls were discharged from the toilet, which fully proved the strong impulse of the toilet. We put newspaper pieces and spitballs into the toilet at the same time, and after starting the drainage, the results showed that the newspaper pieces were easily carried away by the water, achieving a perfect stain removal effect. Therefore, the results from multiple indicators show that the flushing performance of this toilet is excellent, thanks to its unique vortex siphon technology, and enhanced siphon technology supplemented by jet effect.

Fouling performance

In actual use, we often encounter some sticky stains attached to the inner wall of the toilet, which brings great trouble to the washout. Therefore, the fouling performance of the toilet is particularly important. The researchers smeared ink on the inside of the toilet, rinsed it, and then tested for residue. The experimental results show that for three consecutive tests, the ink line is washed clean each time, and there is no residue at all, which is far better than the national standard requirements that the ink is not more than 50mm after washing. This result not only saves us from the trouble of frequent toilet scrubbing, but also makes the toilet cleaner more thoroughly.

Water seal depth and area test

Water seal depth test: Check whether the water seal depth of the toilet meets the standard requirements (such as ≥50mm), and the water seal depth is enough to seal the sewage outlet, prevent odor distribution, and also help improve the sewage effect.

Water seal area test: Ensure that the water seal area meets the specified requirements (such as ≥100×85mm) to provide better sealing effect and sewage protection.